Services / Measure and inspect

Measure and inspect

3D scanning, optical measurement, nominal/actual comparison

Measure first, then decide.

I capture parts, patterns and installation spaces with the 3D scanner. The data becomes a digital reference for design, inspection and archive.

On site worldwide on request.

3D scan of the frame on the vehicle: tubes, gusset plate and measuring marks as a mesh
The frame on the vehicle as a 3D scan. Resolution 0.2 mm.
Scope

What I do

  • Capture parts, patterns and assemblies with the 3D scanner
  • Nominal/actual comparison against CAD with a colour deviation map
  • Build a digital reference for reproduction and archive
  • Check fit and clamping before manufacturing
  • Document results
Procedure

How it works

  1. Clarify the inspection goalWhich features matter? Data quality follows the purpose.
  2. ScanOn site or in my workshop.
  3. EvaluateSurface reconstruction, comparison against CAD or against a reference part.
  4. Hand overData, report and a recommendation for the next step.
Measuring equipment

What I can measure

I have access to a complete range of scanners, from stationary structured-light scanners for small parts to tracking systems for large components. I choose the system according to the part and the accuracy required.

  • Accuracy depending on the system down to 0.004 mm on small parts
  • Large components and complete vehicles: volumetric accuracy of around 0.06 mm over about 10 m³
  • Metrology scanners with the manufacturer's accuracy verification to VDI/VDE 2634 and ISO 10360, tested in an ISO/IEC 17025 accredited laboratory
  • Inspection report as a technical measurement report, not an accredited calibration certificate
  • Part sizes from a few centimetres up to a complete vehicle
  • Nominal/actual comparison with inspection software certified by the PTB, Germany's national metrology institute
  • Data as a mesh (STL, OBJ, PLY), CAD model (STEP) after reverse engineering (a CAD model is built from the scan), inspection report with colour-coded nominal/actual comparison as PDF
  • Measuring on site worldwide on request or in my workshop in Saulheim

Do you have a similar task?

Tell me briefly what it is about.

Describe your taskCall