Projects / Mechanical engineering
Customer project
Compressor wheel: adapting the contour to an existing housing
Compressor wheel scanned and transferred into CAD by reverse engineering (a CAD model is built from the scan). Adapted there, then machined on the lathe.
My role: 3D scanning, reverse engineering, turning. Status: machined.

Problem
The contour of the compressor wheel did not match the existing housing.
Turning point
The scan provided the geometry. The new contour was created in CAD, then on the lathe.
Result
The contour is adapted to the housing.
Task
Initial situation
The outer contour of a compressor wheel was to match an existing housing.
Requirements and key data
- 3D scan of the compressor wheel
- Reverse engineering: CAD model from the scan data
- Shape check with zebra stripes (curvature analysis)
- Adaptation of the contour in CAD
- Machining on the lathe in a clamping fixture
- Customer not named
Images
From the project





Approach
The steps
- ScanCapture the geometry of the compressor wheel.
- ReconstructCAD model from the scan data by reverse engineering.
- CheckCheck the curvature of the surfaces with the zebra shape check.
- AdaptAdapt the contour to the housing in CAD.
- TurningProduce the contour on the lathe.
Result
What came out of it
- The contour is adapted to the housing.
Do you have a similar task?
Tell me briefly what it is about.