Projects / Foundry and mid-sized companies

Customer project from the foundry

Rope wedges: parametric casting patterns

Rope wedge scanned, reconstructed as a surface model and built as a parametric casting pattern.

My role: scanning, reverse engineering (a CAD model is built from the scan) and design. Status: delivered.

Wooden casting pattern in its initial condition
Wooden casting pattern in its initial condition
Problem

The casting patterns for rope wedges existed only in wood. What was needed was a digital model that can be adapted for variants.

Turning point

The scan first became a surface model. On that basis I built the casting pattern parametrically.

Result

Further variants are created via parameters, without a new design.

Task

Initial situation

The foundry had wooden casting patterns for rope wedges. What was needed was a digital model that can be adapted for further variants.

Requirements and key data
  • Scan of the rope wedge as source data
  • CAD surface model from the scan as the basis
  • Parametric model for cope and drag, 600 × 600 mm
  • With runner system, gates and feeders
  • Variants are created via parameters, without a new design
Images

From the project

Casting pattern halves as a parametric CAD model
Casting pattern halves as a parametric CAD model
Approach

The steps

  1. ScanCapture the rope wedge as actual geometry.
  2. Reconstruct surfacesThe scan data becomes a CAD surface model.
  3. Build parametricallyCasting pattern for cope and drag with runner system, gates and feeders.
Result

What came out of it

  • The casting pattern is available as a parametric CAD model.
  • Further variants are created via parameters, without a new design.

For your company

The approach suits any company with existing parts but no data: capture, test on the part, then decide. To the industry page Foundry and mid-sized companies

Do you have a similar task?

Tell me briefly what it is about.

Describe your taskCall