Projects / Workshop and more

Workshop

Pellet feeder with control unit: feed screws made from auger bits, electronics box with ESP32

A feeder for pellets as my own development. Standard parts and 3D printing make a scalable and low-cost solution.

My role: design, construction, software, testing. Status: tested.

Layout in CAD: hopper, three feed screws, three outlets
Layout in CAD: hopper, three feed screws, three outlets
Problem

A feeder was to dose pellets of different feed types.

Turning point

Auger bits and standard parts take care of the mechanics. The rest is printed.

Result

A scalable and low-cost solution. The control unit sits in its own electronics box.

Task

Initial situation

A feeder was to dose pellets of different feed types and be easy to extend.

Requirements and key data
  • Auger bits as feed screws
  • Bearings and shaft couplings as standard parts
  • All other parts 3D-printed, housing and bearing seats made of PETG
  • Controlled by an ESP32 with my own software, operated via a web interface
  • Electronics box with relay boards and circular connectors
  • Angled key as the matching tool, printed from PET-CF (plastic with carbon fibre)
  • Gravimetric calibration per feed type
  • Automatic detection of a blockage
  • Smart home integration
Images

From the project

Section through the hopper in CAD
Section through the hopper in CAD
Section in detail: outlet of the hopper
Section in detail: outlet of the hopper
Printed feed channels with threaded inserts
Printed feed channels with threaded inserts
Video: shaft coupling on the feed screw
Printed hopper with feed screw on the test bench
Printed hopper with feed screw on the test bench
The opened electronics box. Also in the picture: the angled key made of PET-CF
The opened electronics box. Also in the picture: the angled key made of PET-CF
Relay boards and connectors in the housing
Relay boards and connectors in the housing
Show more images (2)
Housing of the electronics box during 3D printing
Housing of the electronics box during 3D printing
Motor cables with circular connectors, in front of them the feed channels
Motor cables with circular connectors, in front of them the feed channels
Approach

The steps

  1. DesignLay out the housing with bearing seats for printing. Auger bits serve as feed screws.
  2. BuildPrint and fit standard parts: bearings and shaft couplings.
  3. ControlESP32 with my own software in its own electronics box. Operated via a web interface, integrated into the smart home.
  4. CalibrateGravimetrically, per feed type.
  5. TestTest in continuous operation.
Result

What came out of it

  • A scalable and low-cost solution.
  • The control unit detects a blockage by itself.
  • The control unit sits in its own housing with plug-in connections.

Do you have a similar task?

Tell me briefly what it is about.

Describe your taskCall