Projects / Motorsport and vehicle engineering

Customer project

KTM 1290 Adventure: tail cover made of PPS-CF

Tail scanned, cover designed inside the scan and printed from carbon-fibre-reinforced PPS.

Customer: Jochen Greim. My role: scanning, reverse engineering (a CAD model is built from the scan) and design. Status: mounted.

Scan at the tail of the KTM 1290 Adventure
Problem

The new cover has to fit the tail exactly and withstand the loads in use.

Turning point

The first version was bolted on. The second is plugged in, with TPU (rubber-like plastic) bushings. This way it mounts without tools.

Result

The PPS-CF (plastic with carbon fibre) part sits on the motorcycle.

Task

Initial situation

The cover at the tail of a KTM 1290 Adventure was to be replaced. The new part has to fit the tail exactly and withstand the loads in use.

Requirements and key data
  • Replaces the previous cover at the tail
  • Shape follows the scan of the tail
  • Loads in use: heat, vibration, weather, fuel and oil
  • Material PPS-CF: stiff, dimensionally stable and heat-resistant
  • Absorbs hardly any moisture
  • Second version: plugged in with TPU bushings, mounts without tools
Images

From the project

First version in CAD: four bolting points
First version in CAD: four bolting points
First version in the printer
First version in the printer
Second version in CAD, built on the scan of the tail
Second version in CAD, built on the scan of the tail
Underside of the second version with pins for the plug-in connection
Underside of the second version with pins for the plug-in connection
Second version in the printer
Second version in the printer
Printed underside with the mounts
Printed underside with the mounts
The second version on the motorcycle, with no visible bolts
The second version on the motorcycle, with no visible bolts
Show more images (4)
Cover on the pillion seat
Cover on the pillion seat
The motorcycle with the cover
The motorcycle with the cover
The printed cover at the tail
The printed cover at the tail
Cover from behind
Cover from behind
Approach

The steps

  1. PrepareMatt the tail with scanning spray.
  2. ScanCapture the tail with the handheld scanner.
  3. AlignAlign and prepare the scan.
  4. DesignBuild the cover directly inside the scan.
  5. First versionBolted on with four bolts.
  6. Second versionPlugged in with TPU bushings.
  7. PrintFrom PPS-CF.
  8. SurfacePrime, fill, paint.
  9. MountOn the motorcycle, without tools.
Result

What came out of it

  • The cover sits on the motorcycle.
  • Its shape follows the scan of the tail.
  • The material follows the loads in use.

For your company

Retrofitting without drilling into or welding on the structure: this applies to machines and plants just as well. To the industry page Motorsport and vehicle engineering

Do you have a similar task?

Tell me briefly what it is about.

Describe your taskCall