Projects / Aviation and regulated manufacturing

Final thesis project, customer anonymised

Assembly fixture for an aircraft

A mobile fixture for production, built largely from purchased parts. It allows work on the aircraft from all sides.

Customer: manufacturer in the aviation industry, not named. My role: designer and builder. Status: in use to this day.

The finished fixture
The finished fixture
Problem

Production lacked a fixture that holds the aircraft securely and makes it accessible from all sides.

Turning point

The concept relies on purchased parts as far as possible instead of reinventing what already exists.

Result

The fixture is built efficiently and is scalable. It is in use to this day.

Task

Initial situation

A manufacturer in the aviation industry had no fixture in production that held the aircraft securely and gave access from all sides. This fixture was my final thesis project for the state-certified mechanical engineering technician qualification.

Requirements
  • Mounting without any change to the aircraft
  • Stiff enough to work on the clamped aircraft
  • Every side of the aircraft can be reached
  • Height adjustable
  • Mobile from station to station, as space-saving as possible
  • Stable, verified by calculation
Design approach
  • Built from purchased parts as far as possible
  • Purchased parts instead of unnecessary new development
  • Custom parts only where they are needed
  • Efficient and scalable, because what already exists is put to good use
Images

From the project

Assembly in the workshop
Assembly in the workshop
The fixture after assembly
The fixture after assembly
Approach

The steps

  1. Record requirementsLook at the workflows in production and define the requirements.
  2. Define the conceptCombine everything in one fixture and plan for purchased parts as far as possible.
  3. CalculateCalculate load capacity and stability.
  4. DesignCAD model made of purchased parts and custom parts.
  5. Build and hand overAssembled in my workshop, in use at the customer's site.
Result

What came out of it

  • Work can be done on the clamped aircraft from both sides.
  • The fixture is economical and scalable because it consists of purchased parts as far as possible.
  • Nothing was reinvented unnecessarily: what already exists is put to good use.
  • The fixture is in use to this day.
  • I do not name the customer.

For your company

Documented steps, clear inspection features and trained users help in any manufacturing that requires proof. To the industry page Aviation and regulated manufacturing

Do you have a similar task?

Tell me briefly what it is about.

Describe your taskCall